messed up screws or what?

Does anyone have the same problem? the marked screws don't unscrew.. Its a 240sx vert

Right strut



Left strut


video
https://s250.photobucket.com/albums/gg258/Outsole/?action=view&current=MOV05858.flv

omg..i see the problem someone drew all over the pic lol.. j/k.. ok this is what you do... this would be easier if you have lower/coilover springs.. but if not you'll have a hell of a time puting it back to gether... that bolt is not securly weld on the top of the struts.. so what you ahve to do is.... take's a little bit of skillz to pull this off.. unbolt the nut which hold the the shock ontop the cap.. ( which is the nut in the middle of the 3 on the strut tower. (the one which is directly on the shock ) ) then proceed to taking your strut out... but remember that springg is gonna wanna shoot out, so process with caution... then after you get the strut out...find something like a vise grip or a channel lock to hold the bottom of the screw while someone ratchet the nut off on the top..... or just tack weld the sucker on and call it a day. i'll elaborate more with pictures later.

It's lowered on tein springs, alright ill try that thanks sambo aha

use an impact gun

actualy yea id rather have someone show me it would be easier, or through some pictures

damn that sucks man. i'd probably have it tacked onto the pillow mount so it wont move, then u can undo the nut. probably do that to all of them too to prevent this in the future, even if u get replacement pillow mounts.

Aha yea there's hella shit missing on the car, like 3 or 4 screws missing on valve cover. oh yea the front two screws on the valve cover doesn't screw in they stay loose. Someone needs to check it out forsure.